Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Ford ZX2 AutomaticFACTORY OEM SERVICE PROCEDURE
Component Testing Procedure
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
SEAT ADJUST SWITCH, DRIVER SIDE FRONT (14A701) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Forward/Rearward Circuit | 6 and 3 | Forward | Closed circuit |
| Rest/Rearward | Open circuit | ||
| 6 and 11 | Rest/Forward | Open circuit | |
| Rearward | Closed circuit | ||
| Front up/down circuit | 6 and 5 | Up | Closed circuit |
| Rest/Down | Open circuit | ||
| 6 and 4 | Rest/Up | Open circuit | |
| Down | Closed circuit | ||
| Rear up/down circuit | 6 and 8 | Up | Closed circuit |
| Rest/Down | Open circuit | ||
| 6 and 9 | Rest/Up | Open circuit | |
| Down | Closed circuit | ||
| Forward/Rearward Recliner Circuit | 6 and 12 | Rest/Forward | Open circuit |
| Rearward | Closed circuit | ||
| 6 and 7 | Forward | Closed circuit | |
| Rest/Rearward | Open circuit |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.