Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Ford ZX2 AutomaticFACTORY OEM SERVICE PROCEDURE
Component Testing Procedure
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
MASTER WINDOW ADJUST SWITCH (14540) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | 1 (C504b) and 3 (C504b) | Lock On | Closed circuit |
| Lock Off | Open circuit | ||
| One-Touch Down Switch, left front | 1 (C504b) and 5 (C504a) | Down | Closed circuit |
| 11 (C504a) and 5 (C504a) | Rest | Open circuit | |
| one-touch up switch, left front | 1 (C504b) and 5 (C504b) | Up | Closed circuit |
| 11 (C504a) and 8 (C504a) | Rest | Open circuit | |
| One-Touch Down Switch, right front | 1 (C504b) and 9 (C504a) | Down | Closed circuit |
| 2 (C504a) and 8 (C504a) | Rest | Open circuit | |
| one-touch up switch, right front | 1 (C504b) and 3 (C504a) | Up | Closed circuit |
| 2 (C504a) and 8 (C504a) | Rest | Open circuit | |
| Left front window circuit | 1 (C504b) and 5 (C504b) | Up | Closed circuit |
| 1 (C504b) and 5 (C504a) | Down | Closed circuit | |
| Right front window circuit | 1 (C504b) and 3 (C504a) | Up | Closed circuit |
| 1 (C504b) and 9 (C504a) | Down | Closed circuit | |
| Left rear window circuit | 1 (C504b) and 2 (C504b) | Up | Closed circuit |
| 1 (C504b) and 6 (C504b) | Down | Closed circuit | |
| Right rear window circuit | 1 (C504b) and 8 (C504b) | Up | Closed circuit |
| 1 (C504b) and 4 (C504b) | Down | Closed circuit |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.