Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Ford ZX2 AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| A/C Compressor Mounting Bolt | 15-22 (20-30) | |||||||||
| Camshaft Bearing Cap Bolt (1) | 10-13 (13-18) | |||||||||
| Camshaft Sprocket Bolt | ||||||||||
| Intake | 50 (68) | |||||||||
| Exhaust | 89 (120) | |||||||||
| Connecting Rod Cap Nut | ||||||||||
| Step 1 | 26 (35) | |||||||||
| Step 2 | Additional 90 Degrees | |||||||||
| Crankshaft Pulley Bolt | 81-89 (110-120) | |||||||||
| Cylinder Head Bolt (2000) (2) | ||||||||||
| Step 1 | 11-18 (15-25) | |||||||||
| Step 2 | 26-33 (35-45) | |||||||||
| Step 3 | Additional 105 Degrees | |||||||||
| Cylinder Head Bolt (2001) (2) | ||||||||||
| Step 1 | 15 (20) | |||||||||
| Step 2 | 30 (40) | |||||||||
| Step 3 | Additional 105 Degrees | |||||||||
| Exhaust Manifold Nuts | 13-16 (18-22) | |||||||||
| Flywheel Bolt | 75-85 (102-115) | |||||||||
| Generator Mounting Bolt | 35 (47) | |||||||||
| Intake Manifold Bolt/Nut | 12-15 (16-20) | |||||||||
| Main Bearing Cap Bolt (3) | 55-66 (75-90) | |||||||||
| Oil Pan Bolt | 15-22 (20-30) | |||||||||
| Rear Seal Housing Bolt | 13-16 (18-22) | |||||||||
| Timing Belt Tensioner Bolt | 16-21 (22-28) | |||||||||
| Torque Converter Nuts | 27 (37) | |||||||||
| Transaxle-To-Engine Bolt | ||||||||||
| Auto. Trans. | 28-38 (38-51) | |||||||||
| Man. Trans. | 41-59 (55-80) | |||||||||
| Water Pump Bolt | 17 (24) | |||||||||
| INCH Lbs. (N.m) | ||||||||||
| Center Timing Belt Cover Bolt | 115 (13) | |||||||||
| Lower Timing Belt Cover Bolt | 62 (7) | |||||||||
| Lower Cylinder Block Bolts | ||||||||||
| Step 1 | 62-115 (7-13) | |||||||||
| Step 2 | (4) | |||||||||
| Oil Pump-To-Block | 88-97 (10-11) | |||||||||
| Oil Strainer Bolt | 71-97 (8-11) | |||||||||
| Spark Plug | 106-156 (12-18) | |||||||||
| Splash Shield | ||||||||||
| 2000 | 62-97 (7-11) | |||||||||
| 2001 | 80 (9) | |||||||||
| Upper Timing Belt Cover Bolt | ||||||||||
| 2000 | 27-44 (3-5) | |||||||||
| 2001 | 35 (4) | |||||||||
| Valve Cover | 53-71 (6-8) | |||||||||
| Water Pump Pulley Bolt | 88-124 (10-14) | |||||||||
|
||||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.