Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Ford Taurus SELFACTORY OEM SERVICE PROCEDURE
Using 2 Programmed Keys
NOTE:
This procedure will only work if 2 or more programmed ignition keys are available or additional keys are needed. If 2 keys are not available, see ERASE ALL KEYS & PROGRAM 2 KEYS
.
- Turn ignition switch from OFF to RUN position. Leave ignition switch in RUN position for 3 seconds. Turn ignition switch to OFF position. Remove key.
- Within 5 seconds of turning ignition switch to OFF position, insert new unprogrammed ignition key into ignition lock cylinder. Turn ignition switch from OFF to RUN position. Leave ignition switch in RUN position for 3 seconds. Turn ignition switch to OFF position. Remove key.
- For additional key, repeat procedure from step 1) .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.