2000 Ford Contour SVTFACTORY OEM SERVICE PROCEDURE

Spark Check

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 Mercury Sable, 2002 Mercury Grand Marquis, 2002 Mercury Cougar, 2002 Lincoln Town Car, and 2002 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Always perform self-diagnostic QUICK TEST to check for ignition-related fault codes, and repair as necessary. See QUICK TEST in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article. If no fault codes are retrieved, check for proper spark at each cylinder, go to TEST JB, step 17)Β  under SYSTEM TESTS in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article. If spark is not present, go to TEST A: NO-START in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.