2000 Ford Contour SVTFACTORY OEM SERVICE PROCEDURE

General Specifications

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Brake Pads 
Minimum brake pad thickness 3.0 mm (0.118 inch)
Maximum brake pad thickness variation (pad-to-pad) 2.0 mm (0.079 inch)
Maximum brake pad taper wear (in any direction) 3.0 mm (0.118 inch)
Brake Disc 
Minimum brake disc thickness 26.35 mm (1.03 inch)
Minimum thickness to machine front brake disc 26.95 mm (1.06 inch)
Lubricant 
High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) ESA-M6C25-A or WSS-M6C62-A
High Temperature Nickel Anti-Seize Lubricant XL-2 ESE-M12A4-A
Metal Brake Parts Cleaner PM-4 (Canada CPM-4) -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.