2000 Ford Contour SVTFACTORY OEM SERVICE PROCEDURE

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The audio system and DVD player are enabled when the ignition switch is in the RUN or ACC position. The speakers are powered by the audio unit and the subwoofer is powered by its own amplifier. The steering wheel controls send information to the audio unit allowing the driver to adjust various audio controls. The audio unit can contain an integral 6-disc CD changer (CD6) or the vehicle can be equipped with one of the following audio units that is not repairable: the M100CD AM/FM/CD (single CD) or the DM100 AM/FM/CD/cassette (premium).

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.