Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1999 Ford Contour SVTFACTORY OEM SERVICE PROCEDURE
Inertia Fuel Shutoff (Ifs) Switch
WARNING:
DO NOT reset IFS switch until fuel system has been inspected for leaks and repaired if necessary.
- If IFS switch is tripped, engine cannot be restarted until switch is manually reset. To reset IFS switch, depress switch button. For IFS switch location, see INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION table.
- To test IFS switch, turn ignition off. Remove IFS switch. Shake IFS switch to force it into tripped position (switch open). Check continuity between appropriate IFS switch terminals. See WIRING DIAGRAMS article. Continuity should not exist. Reset switch and ensure continuity exists between appropriate terminals.
INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION
| Application | Location | |
|---|---|---|
| Continental | Left Fender Apron Near Suspension Switch | |
| Contour, Cougar & Mystique | Behind Left Kick Panel | |
| Escort & Tracer | ||
| Coupe & Sedan | Right Side Of Trunk | |
| Wagon | Right Side Of Cargo Area | |
| Mustang | Lower Left Rear Of Trunk | |
| Sable & Taurus | Right Side Of Trunk Behind Wheel Well | |
| Town Car | Above Left Rear Wheel Well | |
| All Others | In Trunk On Left Hinge Support Or Behind Trim Panel | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.