1998 Ford Mustang Base, 2D Convertible, AutomaticFACTORY OEM SERVICE PROCEDURE

Master Switch

Remove power window master switch (leave harness connected). Using a test light connected to ground, backprobe appropriate wire while actuating power window switch in specified positions. See appropriate MASTER SWITCH TESTING table. If test light does not illuminate at appropriate switch positions, replace power window master switch.

MASTER SWITCH TESTING

Circuit Function Wire Color
Left Front Window Down White/Black
Left Front Window Up Yellow
Right Front Window Down Tan/Light Blue
Right Front Window Up White/yellow
Left Rear Window Down Yellow/Light Blue
Left Rear Window Up Gray/Orange
Right Rear Window Down Yellow/Black
Right Rear Window Up Red/Black
Passenger Lock-Out (1) Red/Light Blue
(1) Pink on models with keyless entry.
MASTER SWITCH TESTING

Circuit Function Wire Color
Left Window Down Yellow
Left Window Up White/Black
Right Window Down Tan/Light Blue
Right Window Up White/Yellow
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.