Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Ford Contour SVTFACTORY OEM SERVICE PROCEDURE
Control Units
CONTROL UNITS
| Component | Component Location |
|---|---|
| ABS Control Module (2.0L) | In left rear of engine compartment, near brake booster. See Figure . |
| ABS Control Module (2.5L) | In left rear of engine compartment, near brake booster. See Figure . |
| Air Bag Diagnostic Monitor | Under center of dash, behind ashtray. See Figure . |
| Anti-Theft/Central Locking Module | On center of right "A" pillar. |
| Central Timer Module | Under left side of dash, on central junction box. |
| Fuel Pump Module | Under center of rear seat. See Figure . |
| Intake Manifold Runner Control (IMRC) | On top of engine. |
| Instrument Interface Module | Behind left side of dash. |
| Overspeed Warning Module | Under left side of dash. |
| Passive Anti-Theft Module | On bottom of right "A" pillar. |
| Passive Anti-Theft Transceiver Module | On top of steering column. |
| Power Antenna Timing Unit | In right rear of luggage compartment, behind panel. See Figure . |
| Powertrain Control Module (PCM) (2.0L) | In right rear corner of engine compartment, behind power steering reservoir. See Figure . |
| Powertrain Control Module (PCM) (2.5L) | In right rear corner of engine compartment, behind power steering reservoir. See Figure . |
| Speed Control Module (2.0L) | In left rear corner of engine compartment, near strut tower. See Figure . |
| Speed Control Module (2.5L) | In left rear of corner engine compartment, near strut tower. See Figure . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.