Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Ford Contour Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Electrical Component Locator: Switches
SWITCHES
| Component | Component Location |
|---|---|
| A/C Compressor Cycling Switch (2.0L) | In left front of engine compartment. See Figure . |
| A/C Compressor Cycling Switch (2.5L) | In left front of engine compartment. See Figure . |
| Air Bag Safing Switch | Behind bottom of right kick panel. See Figure . |
| Brake Fluid Level Switch (2.0L) | In left rear of engine compartment. See Figure . |
| Brake Fluid Level Switch (2.5L) | In left rear of engine compartment. See Figure . |
| Brake Pedal Switch | Under left side of dash, near top of brake pedal. |
| Clutch Pedal Switch (M/T) | On bracket, above clutch pedal. See Figure . |
| Dual Pressure Switch (2.0L) | In right front of engine compartment, on A/C line. See Figure . |
| Dual Pressure Switch (2.5L) | In right front of engine compartment, on A/C line. See Figure . |
| Inertia Fuel Shut-Off (IFS) Switch | Behind left kick panel. See Figure . |
| Low Coolant Level Switch (2.0L) | In right front corner of engine compartment, in coolant reservoir. See Figure . |
| Low Coolant Level Switch (2.5L) | In right front corner of engine compartment, in coolant reservoir. See Figure . |
| Oil Pressure Switch (2.0L) | On right side of engine. See Figure . |
| Oil Pressure Switch (2.5L) | On left side of engine. See Figure . |
| Park Brake Switch | At base of parking brake lever. See Figure . |
| Park/Neutral Position (PNP) Switch (A/T) (2.0L) | In left side of engine compartment, on top of transaxle. See Figure . |
| Park/Neutral Position (PNP) Switch (A/T) (2.5L) | In left side of engine, compartment, on top of transaxle. See Figure . |
| Power Steering Pressure Switch (2.5L) | On right front of engine. See Figure . |
| Seat Belt Buckle Switch | In driver's seat belt buckle. |
| Start Inhibit Switch | On clutch pedal support. |
| Stop Light Switch | On bracket, above brake pedal. See Figure . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.