Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Seat Module Test: Notes
If seat is stuck in the most rearward and downward position, it may be necessary to remove seat to gain access to module. Module is located on inboard side of front seat track. Test results are shown as coded pulses of test Light Emitting Diode (LED). Memory seat module has a built-in diagnostic capability. To enter diagnostics, press White button on top of module. Press test button, recessed into top rear edge of module. Test results are shown as coded pulses of test LED. LED is located inboard of 21-pin receptacle at rear of module. Driver side module test results can also be read on LED located in memory seat switch on driver's door.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.