1996 Ford Explorer 2D Utility, AWDFACTORY OEM SERVICE PROCEDURE

Charging System - Generator: Specifications

GENERATOR TORQUE SPECIFICATIONS

Description N-m Lb-Ft Lb-In
Mounting Bracket Bolts 40-54 30-40 -
Output Terminal Attaching Nut 9-12 6.5-9 -
Regulator to Generator 2.8-4.0 - 25-35
Brace Attaching Nut (2.3L) 26-34 19-25 -
Brace Attaching Bolt (2.3L) 23-28 17-21 -
Generator to Belt Tensioner (2.3L) 34-46 25-34 -
Belt Tensioner/Mounting Bracket (2.3L) 40-60 30-44 -
Mounting Bracket to Block (2.3L) 40-54 30-40 -
Generator Pivot 54-68 40-50 -
Generator to Bracket 40-54 30-40 -
Regulator to Generator 2.8-4.0 - 25-35
Generator-to-Bracket Bolt (5.0L) 40-55 30-40 -
Generator Output Terminal Nut (5.0L) 9-12 - 80-106
A/C Manifold and Tube Bracket Nut (5.0L) 15-22 - 11-16
Generator Pulley Nut (5.0L) 81-135 79-99 -
Air Cleaner Outlet Tube Clamps (5.0L) 2-3 - 17-25
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.