Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Ford Taurus V6-232 3.8LFACTORY OEM SERVICE PROCEDURE
Blower Motor Speed Control
WITH AUTOMATIC TEMPERATURE CONTROL
The A/C blower motor speed control is located in the A/C evaporator housing upstream of the A/C evaporator core.
CAUTION: The system should not be operated with the A/C blower motor disconnected. Damage may occur to the electronic A/C blower motor speed control if cooling air is not provided by the A/C blower motor.
Blower Speed Controller:
The A/C blower motor speed control is located in the A/C evaporator housing upstream of the A/C evaporator core.
CAUTION: The system should not be operated with the A/C blower motor disconnected. Damage may occur to the electronic A/C blower motor speed control if cooling air is not provided by the A/C blower motor.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.