1995 Ford Taurus V6-182 3.0LFACTORY OEM SERVICE PROCEDURE

Routine Service



EVERY MONTH

Check Level
Cooling System EC
Mix 50/50 with water

Inspect
Fluid leaks on pavement



EVERY 6 MONTHS

Inspect
Driveshaft Boots
Exhaust System
Radiator Hoses
Heater Hoses
A/C Hoses
Parking Brake System

Check Level
Clutch Reservoir HBH
Power Steering Reservoir MA



EVERY TWELVE MONTHS

Check Level
Brake Master Cylinder HBH
Manual Transaxle

Clean & Inspect
Battery

Inspect
Air Conditioning System
Cooling System
Also check hoses, clamps, and coolant strength

Lubricate
Body Hinges & Latches SLS
Ford Part Number D7AZ-19584-A
Transaxle Controls And Linkage LM



SERVICE AS REQUIRED

Replace
Air Cleaner Element
Cooling System Hoses and Clamps
Fuel Filter



KEY TO LUBRICANTS:
EC -- Ethylene Glycol Coolant Mixed 50/50 With Water
HBH -- Hydraulic Brake Fluid, Extra Heavy-Duty
LM -- Lithium Grease, with Polyethylene
MA -- MERCON(R) Automatic Transmission Fluid. MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per TSB 06-14-4.
SLS -- Special Lubricant-Spray Ford Part # D7AZ-19584-A
W--INDICATES ITEMS TO BE SERVICED TO MAINTAIN EMISSION WARRANTY





Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.