1995 Ford Probe Base, StandardFACTORY OEM SERVICE PROCEDURE

Alignment Specifications: 2.5L

WHEEL ALIGNMENT SPECIFICATIONS (2.5L)

Application Preferred Range
Camber (Degrees) Front -0.9 -1.65 to -0.15
Camber (Degrees) Rear -0.33 -1.08 to 0.42
Caster (Degrees) Front 3 2.25 to 3.75
Caster (Degrees) Rear N/A N/A
Toe-In (Inches) Front 0.12 0 to 0.24
Toe-In (Inches) Rear 0.12 0 to 0.24
Toe-In (Millimeters) Front 3 0 to 6
Toe-In (Millimeters) Rear 3 0 to 6
Toe-In (Degrees) Front 0.28 0 to 0.56
Toe-In (Degrees) Rear 0.28 0 to 0.56
Toe-Out On Turns (Inner-Front) 37° N/A
Toe-Out On Turns (Outer-Front 32° N/A
Steering Axis Inclination (SAI) Front 15.73° N/A
Wheelbase (Inches) 102 15/16 N/A
Wheelbase (Millimeters) 2614 N/A
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.