1993 Ford Probe Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Memory Seat System

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1993 Mercury Sable, 1993 Mercury Grand Marquis, 1993 Mercury Cougar, 1993 Lincoln Mark VIII, and 1993 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
  1. There is no indication whether memory seat function is enabled or disabled. To ensure memory feature is disabled, enter permanent entry code. Press and hold keypad button 7/8. Press and release keypad button 5/6. Release button 7/8. Move seat to 3rd memory position, using memory seat switch. Press UNLOCK button on transmitter. If seat moves to programmed position, system is okay. If seat does not move to programmed position, go to next step.
  2. To enable memory seat, repeat step 1). Disconnect module connector J1. Disconnect memory seat switch connector. Check continuity of Brown/Light Green wire between pin No. 8 of connector J1 and memory seat switch connector. Check continuity of Black/Orange wire between pin No. 21 of connector J1 and memory seat switch connector. If continuity is present, go to next step. If continuity is not present, repair open in either Brown/Light Green or Black/Orange wire.
  3. Disconnect module connector J1. Disconnect memory seat switch connector. Momentarily jumper between pin No. 14 and pins No. 8, and 21. Measure voltage at Brown/Light Green and Black/Orange wires. If reading is 10 volts or greater, replace control module. If reading is less than 10 volts, repair short in Brown/Light Green or Black/Orange wire.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.