Quick Lookups: Fluids

1991 Ford Probe GL, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.09 LBS. 0.94 KG R-12 S
Automatic Transmission Fluid 7.20 QTS. 6.81 L Automatic Transmission Fluid MERCON S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill to line on reservoir. S
Engine Coolant 7.90 QTS. 7.47 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil 2.2L Eng w/Filter 4.40 QTS. 4.16 L SAE 5W-30 (Below 0Deg.F ) 10W-30 (Preferred) (Above 0Deg.F) S
Engine Oil 2.2L Eng w/o Filter 4.10 QTS. 3.88 L SAE 5W-30 (Below 0Deg.F ) 10W-30 (Preferred) (Above 0Deg.F) S
Fuel Tank 15.10 GALS. 57.15 L S
Manual Transmission Fluid Normally Aspirated 3.50 QTS. 3.31 L Automatic Transmission Fluid MERCON S
Power Steering Fluid 0.95 QTS. 0.89 L Motorcraft Type F Automatic Transmission and Power Steering Fluid S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.