Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1991 Ford Probe GL, AutomaticFACTORY OEM SERVICE PROCEDURE
Turbocharger 2.2L: Notes
NOTE:
Turbocharger cannot be overhauled. Turbocharger is serviced by replacement ONLY.
Before removing turbocharger, follow these precautions:
- Clean area surrounding turbocharger using a non-caustic cleaner.
- After unit removal, cover all engine openings with clean cloth to prevent entry of foreign matter.
- Ensure blades are not nicked or otherwise damaged. An imbalance condition could result and lead to severe damage.
- If any internal engine component is replaced, change oil and filter, and flush turbocharger with clean oil.
- Before installing turbocharger on engine, gently spin blades to ensure freedom of movement.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.