Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Advance Components (1.6L Non-Turbo)
Ignition advance is controlled by a centrifugal advance mechanism within the distributor, and by a vacuum advance mechanism. If centrifugal advance is not within specification, service the distributor. Replace the vacuum advance mechanism if vacuum advance is not within specification. See IGNITION TIMING . Also see IGNITION TIMING in ADJUSTMENTS article in the ENGINE PERFORMANCE Section.
| Application | Auto. Trans. | Man. Trans. |
|---|---|---|
| 1.6L Non-Turbo | 1-3 @ 850 | 0-4 @ 850 |
| 1.6L Turbo | 10-14 @ 850 | 0-4 @ 850 |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.