1991 Ford Bronco 4.9 Y, Standard, M5OD-R2FACTORY OEM SERVICE PROCEDURE

Service Intervals & Specifications

REPLACEMENT INTERVALS

Component Interval (Miles)
Air Filter 30,000
Cam Timing Belt 60,000
Coolant 30,000
Crankcase Ventilation Filter 30,000
Oil & Filter 7500
PCV Valve 30,000
Spark Plugs (Standard) 30,000
Spark Plugs (Platinum) 60,000
Spark Plug Wires 60,000
Transfer Case Oil 60,000
Transmission Oil 60,000
DRIVE BELT ADJUSTMENT TENSION SPECIFICATIONS

Application New Belt Lbs. (kg) (1) Used Belt Lbs. (kg)
5.0L W/ Tensioner (2) (3) (3)
5.8L W/ Tensioner (2) (3) (3)
7.5L
With Tensioner (2) (4) (4)
Alt. & Air Pump 160-200 (73-91) 110-130 (50-59)
(1) Any belt operated for 10 minutes.
(2) Tension is correct if tensioner is within indicator marks.
(3) 77 Lbs. (35 kg) minimum for vehicles with 60 and 75 Amp Alternators. 111 Lbs. (50 kg) minimum for vehicles with 100 Amp Alternators.
(4) 94 Lbs. (43 kg) minimum tension.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.