1990 Ford Probe V6-182 3.0LFACTORY OEM SERVICE PROCEDURE

Air Flow Meter/Sensor: Description and Operation


The vane air flow meter measures air flowing into the engine and is mounted between the air cleaner and the throttle body assembly. The meter contains a movable vane directly connected to a potentiometer. Air rushing through the vane air flow meter, changes the position of the vane and potentiometer. The potentiometer relays vane position information to the EEC-IV module. The EEC-IV module, translates vane position information into the amount of air flowing into the engine.
An air temperature sensor is incorporated within the engine and also transmits the information to the EEC-IV module. The EEC-IV module receives, then computes the air flow and air temperature information and adjusts the fuel flow to obtain the optimum air/fuel mixture required.



Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.