Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Ford Taurus SHOFACTORY OEM SERVICE PROCEDURE
Alignment Specifications: Sedan
WHEEL ALIGNMENT SPECIFICATIONS (SEDAN)
| Application | Pref. | Range | |
|---|---|---|---|
| Camber (Degrees) | |||
| Front | -1/2 | -1 1/32 to 1/32 | |
| Rear | -15/16 | -1 5/8 to -1/4 | |
| Caster (Degrees) | |||
| Front | 3 13/16 | 2 13/16 to 4 13/16 | |
| Toe-In (Inches) | |||
| Front | -3/32 | -7/32 to 1/32 | |
| Rear | 1/16 | -1/16 to 3/16 | |
| Toe-In (Millimeters) | |||
| Front | -2.5 | -5.5 to 1 | |
| Rear | 1.5 | -1.5 to 5 | |
| Toe-In (Degrees) | |||
| Front | -3/16 | -7/16 to 1/16 | |
| Rear | 1/8 | -1/8 to 3/8 | |
| Toe-Out On Turns (Degrees) | |||
| Inner (Front) | N/A | 20° | |
| Outer (Front) | N/A | 18 1/4° | |
| Wheelbase | |||
| Inches | N/A | 106.0 | |
| Millimeters | N/A | 2692 | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.