Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1987 Ford Bronco II 4WD, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.50 LBS. | 1.13 KG | R-12 | S | |||
| Automatic Transmission Fluid | 4WD | 10.00 QTS. | 9.46 L | Automatic Transmission Fluid DEXRON II | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill at master cylinder to 1/4" from top. | S | ||
| Differential Gear Oil | Front,Dana 28 | 1.10 PTS. | 0.52 L | FORD Hypoid Gear Oil | S | ||
| Differential Gear Oil | Rear Axle,7.5" Ring Gear Axle | 5.50 PTS. | 2.6 L | FORD Hypoid Gear Oil | S | ||
| Engine Coolant | w/Air Cond | 7.80 QTS. | 7.38 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S | |
| Engine Coolant | w/o Air Cond | 7.20 QTS. | 6.81 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S | |
| Engine Oil | w/Filter | 5.00 QTS. | 4.73 L | SAE 5W-30 Super Premium Engine Oil (Below 0Deg.F), 10W-30 Super Premium Engine Oil (0Deg.F to 100Deg.F), 20W-40/50 Premium Engine Oil (20Deg.F to Above 100Deg.F) | S | ||
| Engine Oil | w/o Filter | 4.00 QTS. | 3.78 L | SAE 5W-30 Super Premium Engine Oil (Below 0Deg.F), 10W-30 Super Premium Engine Oil (0Deg.F to 100Deg.F), 20W-40/50 Premium Engine Oil (20Deg.F to Above 100Deg.F) | S | ||
| Fuel Tank | 23.00 GALS. | 87.06 L | S | ||||
| Manual Transmission Fluid | 4.80 PTS. | 2.27 L | FORD Manual Transmission Fluid | Specification: ESP-M2C83-C. | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid Type F | Specification: ESW-M2C33-F. Approximate dry capacity, includes cooler line. Fluid level indicator should be used to determine actual fluid requirements and fluid specifications. Check level at normal operating temperature. DO NOT overfill. | S | ||
| Transfer Case Fluid | 3.00 PTS. | 1.41 L | Automatic Transmission Fluid DEXRON II | S | |||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.