Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1985 Ford LTD LXFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | N/A | N/A | R-12 | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | 5.0L Eng | 12.30 QTS. | 11.64 L | Automatic Transmission Fluid DEXRON II | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill at master cylinder to 1/4" from top. | S | ||
| Differential Gear Oil | Rear,7.5" Ring Gear Axle | 3.25 PTS. | 1.53 L | FORD Hypoid Gear Oil | S | ||
| Engine Coolant | 5.0L Eng | 14.20 QTS. | 13.43 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S | |
| Engine Oil | 5.00 QTS. | 4.73 L | SAE 5W-30 (Below -20Deg.F to 60Deg.F) 10W-30,10W-40 (Preferred) (0Deg.F to Above 100Deg.F) | S | |||
| Fuel Tank | w/Extended Fuel Range | 20.00 GALS. | 75.7 L | S | |||
| Fuel Tank | w/Standard Carbureted Engines | 16.00 GALS. | 60.56 L | S | |||
| Power Steering Fluid | 1.60 PTS. | 0.75 L | MOTORCRAFT Automatic Transmission or Power Steering Fluid Type F | Approximate dry capacity, includes cooler line. Fluid level indicator should be used to determine actual fluid requirements and fluid specifications. Check level at normal operating temperature. DO NOT overfill. | S | ||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.