1968 Ford AngliaFACTORY OEM SERVICE PROCEDURE

DELCO-REMY Distributor Advance Specifications

NOTE: FOR ENGINE RPM AND DEGREES, MULTIPLY SPECIFICATIONS BELOW BY 2.
Distributor Port No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.) Vacuum Unit No.
Deg. RPM Deg. RPM Deg. RPM Deg. RPM Start Deg. In. Hg. Max. Deg In. Hg.
1110307 C 0-2 475 10-12 1200 .............................. 17-19 1700 0 5-7 11.5 11.5-13 1116198
1110311 C 0-2 975 5-7 1600 .............................. 9-11 2100 0 6-8 12 14.5-15.5 1116230
1110319 C 0-2 500 1-3 600 5-7 1500 9-11 2400 0 6-8 12 14.5-15.5 1116230
1110371 C 0-4 500 7-11 675 9.4-11.4 740 15-17 1500 0 5-7 11 13.8-14 1116248
1110389 C 0-3 500 6-8 700 .............................. 12-14 2200 0 6-8 12 14.5-15.5 1116230
1110399 C 1.5-3.5 600 7.5-9.5 975 .............................. 13-15 2100 0 6-8 11.5 15.5-17 1116217
1110426 C 1.5-3.5 600 6-8 850 .............................. 11-13 1800 0 6-8 12 14.5-15.5 1116230
1110430 C 0-4.8 500 4.8-9.5 600 .............................. 13-15 2200 0 4-6 7.5(2) 9.2-10.2 1973413
1110431 C 0-1.9 500 6-8 825 .............................. 12-14 2500 0 4-6 7.5(3) 9.2-10.2 1973414
1110433 C .6-2.6 600 7.5-9.5 1050 .............................. 15-17 2300 0 6-8 11.5 15.5-17 1116217
1110434 C 2-4 800 .......................... ............................ 13-15 2100 0 6-8 12 14.5-15.5 1116230
1110436 C 0-3.8 550 3-5 630 9.5-11.5 1050 17-19 2300 0 6-8 11.5 15.5-17 1116217
1110437 C .6-2.6 600 7.5-9.5 1050 .............................. 15-17 2300 0 6-8 11.5 15.5-17 1116217
1110438 C 0-3.8 550 3-5 630 9.5-11.5 1050 17-19 2300 0 6-8 11.5 15.5-17 1116217
1110439 C 0-3 500 2.2-5.2 580 9.5-11.5 975 15-17 2100 0 6-8 11.5 15.5-17 1116217
1110441 C 0-3 500 2.2-5.2 580 9.5-11.5 975 15-17 2100 0 6-8 11.5 15, 5-17 1116217
1110442 C 0-1.9 500 8.5-10.5 1000 .............................. 13-15 2100 0 6-8 11.5 15.5-17 1116217
1110443 C 0-3 500 2.2-5.2 580 10.5-12.5 1000 15-17 2100 0 6-8 11.5 15.5-17 1116217
1110444 C 0-3 350 0-3.5 400 8-10 1000 12-14 2000 0 5-7 11 15.5-17 1116207
1110447 C 0-2.1 500 7.5-9.5 850 .............................. 13-15 1850 0 6-8 12 14.5-15.5 1116230
1110449 C 0-1.9 500 6-8 825 .............................. 12-15 2500 0 4-6 7.5 9.2-10.2 1973413
1111106 C .6-2.6 500 7.5-9.5 925 .............................. 15-17 2200 0 4-6 12 18-19.3 1115362
1111150 C 1.5-3.5 600 4-6 750 6.5-8.5 1000 13-15 2100 0 7-9 8 15-17 1116201
1111168 C 0-2.2 500 3.2-5.5 640 6.5-8.5 850 12-14 2350 0 9-11 8 16.5-17.5 1968861
1111169 C 0-2.7 500 2.5-5 600 7.5-9.5 1000 15-17 2500 0 7-9 8 15-16 1116201
1111170 C 0-2.7 500 2.5-5 600 7.5-9.5 1000 15-17 2500 0 6-8 6.4 11.3-12.5 1115360
1111191 C .5-2.5 500 7.5-9.5 1000 .............................. 13-15 2200 0 8-10 12 18.5-20.5 1115363
1111194 C 0-3 500 1.5-4.5 550 6.5-7.5 750 14-16 2550 0 5-7 8 11.2-127 1115355
1111198 C .5-2.5 450 7.5-9.5 800 .............................. .4-16 1950 0 4-6 12 18-19.3 1115362
1111239 C .3-2.3 400 7.3-9.3 975 .............................. 13-15 2200 0 8-10 12.5(3) 18.5-20.5 1973409
1111257 C .7-2.7 600 4-6 800 .............................. 13-15 2100 0 5-7 8 11.2-12.7 1115355
1111264 C 0-3 525 4.7-7.7 680 9-11 900 14-16 2350 0 9-11 8 16.5-17.5 1968861
1111266 C 0-2.6 550 10.3-13 960 11-13 980 15-17 2075 0 9-11 8 16.5-17.5 1968861
1111270 CC 0-2 500 5-7 1000 .............................. 9-11 2300 0 10-12 10(3) 17-18.8 1973412
1111272 CC .5-2.5 500 7.5-9.5 950 .............................. 15-17 2275 0 8-10 10(3) 15-17 1973411
1111277 C 0-2.6 500 2-4.7 580 15-17 2500 14.3-17 3000 0 6-8 8 14.5-15.75 1116201
1111278 C 0-2.6 500 2-4.7 580 15-17 2500 14.3-17 3000 0 6-8 6.4 11.3-12.5 1115360
1111281 CC 1-3 550 6.5-8.5 975 .............................. 11-13 2400 0 8-10 10(3) 15-17 1973411
1111282 CC 1.5-3.5 700 4-6 1000 .............................. 8-10 2500 0 8-10 10(3) 15-17 1973411
1111284 C .4-2.4 450 8.5-10.5 875 .............................. 13-15 2300 0 6-8 8 14.5-15.75 1116210
1111285 C 0 500-600 9.5-11.5 900 .............................. 15-17 2300 0 6-8 7-9 16 1116210
1111286 CC 0-1.8 400 1.7-4 500 2.2-4.2 520 14-16 2000 0 8-10 12.5 18.5-20.5 1973408
1111287 CC .4-2.4 500 8-10 900 .............................. 10-12 2000 0 8-10 12.5 18.5-20.5 1973408
1111289 CC .4-2.4 700 ........................ .............................. 6-8 1500 0 8-10 12.5 18.5-20.5 1973408
1111290 CC .3-2.3 500 8-10 900 10-12 2000 8.8-12 3000 0 8-10 12.5 18.5-20.5 1973408
1111291 CC 0-2 425 8-10 900 13-15 2000 11.8-15 3000 0 6-8 13 16-17.5 1973407
1111292 CC .5-2.5 750 6-8 1500 .............................. 4.2-8 3000 0 8-10 12.5 18.5-20.5 1973408
1111293 C 0-2.7 500 2.5-5 600 7.5-9.5 1000 15-17 2500 0 6-8 6.4 11.3-12.5 1115360
1111294(4) C 0-2.6 500 2-4.7 580 15-17 2500 14.3-17 3000 0 6-8 6.4 11.3-12.5 1115360
1111295(4) C .5-3.3 700 6.7-9.5 930 13.5-15.5 2500 12.7-15.5 3000 ........................ .............................. 1115373
1111296(4) C 0-2 550 14-16 1900 .............................. 12.5-16 3000 0 6-8 8 14.5-15.75 1116201
1111297 C 1.5-3.5 600 7.5-9.5 950 .............................. 14-16 2050 0 9-11 8 16.5-17.5 1968861
1111298 C 0-3 500 2-5 570 10-12 1000 16-18 2050 0 6-8 8 14.5-15.75 1116201
1111299 CC 0-2 400 6-8 900 .............................. 9-11 2300 0 10-12 10 17-18.8 1973412
1111300 CC 0-2 500 5-7 1000 .............................. 9-11 2300 0 10-12 10(3) 17-18.8 1973412
1111327 C .5-3 400 11-13 1000 .............................. 15-17 2200 ....................... .............................. ............
1111328 C .4-3 400 10-13 1000 15-17 2000 13.8-17 3000 ....................... .............................. ............
1111330 C 0-3 600 7.5-10.5 870 8.5-10.5 900 13-15 2300 0 6-8 8 14.5-15.75 1116210
111399 C 0 400-500 7.5-9.5 975 .............................. 13-15 2100 0 6-8 10-12 17 1116217
111435 CC 0-2 480 6-8 1000 .............................. 10-12 2300 0 10-12 10(3) 17-18.8 1973412
1111438 C 0-3 525 4.7-7.7 680 9-11 900 14-16 2350 0 6-8 8 14.5-15.75 1116201
1111439 C 0-2.7 600 5.2-8.4 800 6.7-8.7 850 15-17 2200 0 5-7 8 11.2-12.7 1115355
1111440 C 0-2 550 3-5 700 .............................. 17-19 1975 0 5-7 8 11.2-12.7 1115355
1111441(4) C 0-3.3 500 6-9 685 14-16 2200 128-16 3000 0 6-8 8 14.5-15.75 1116201
1111443 C 0-2 600 4.7-7.7 680 .............................. 15-17 1975 0 5-7 8 11.2-12.7 1115355
1111444 C 0-3 525 6.7-8.7 740 9-11 900 14-16 2350 0 6-8 8 14.5-15.75 1116201
1111445 C 0-4 500 2.5-6.7 560 9.5-11.5 1000 17-19 2500 0 6-8 8 14.5-15.75 1116201
1111447 CC 0-2 640 3.5-5.5 950 .............................. 8-10 2400 0 8-10 10(3) 15-17 1973411
111448 CC 1-3 700 5-7 1000 .............................. 9-11 2300 0 10-12 10(3) 17-18.8 1973412
1111449 CC 1-3 700 5-7 1000 .............................. 9-11 2300 0 8-10 10 (3) 15-17 1973411
1111450 CC 1.3-3.3 700 6-8 1000 .............................. 10-12 2300 0 8-10 10 15-17 1973411
1111463 CC 1.4-3.4 550 ........................ .............................. 10-12 2000 0 6-8 13 16-17.5 1973407
1111466 CC 0-2 650 6.5-8.5 1300 .............................. 11-13 2000 0 6-8 13 16-17.5 1973407
1111467 C 2-4.5 750 10.3-13 1090 10.7-13.1 1100 15-17 2200 0 9-11 8 16.5-17.5 1968861
1111468 CC .5-2.5 450 7-9 1000 .............................. 9-11 1900 0 10-12 8.7 16.2-17.8 1973418
1111469 CC 0-2 550 ........................ 5-7 1000 9-11 1800 0 8-10 12.5 18.5-20.5 1973408
1111470 CC .5-2.5 450 7-9 1000 9-11 1900 7.8-11 3000 0 10-12 8.7 16.2-17.8 1973418
1111471   0-2 550 5-7 1000 9-11 1800 7.5-11 3000 0 8-10 12.5 18.5-20.5 1973408
1111472 C .5-2.5 550 7.5-9.5 1000 .............................. 13-15 2000 0 4-6 12 18-19.3 1115362
1111473 C 0-2.5 450 8-10.5 790 8.5-10.6 805 14-16 2200 0 8-10 12.5 18.5-20.5 1115363
1112795 C 0-2 425 4.5-6.5 800 8-10 1600 11-13 2300 ....................... .............................. ............
(1) C (Clockwise); CC (Counterclockwise) viewed from rotor end
(2) Maximum retard is 1.75-3.25° at 11" Hg
(3) Maximum retard is 4-6° at 11" Hg
(4) Breakerless (Pulse Generator) distributor used with transistor or Capacitor Ignition Systems.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.