2025 Fiat 500eFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant N/A N/A R1234yf Contact the dealer for further references. S
Automatic Transmission Fluid 0.18 GALS. 0.68 L MOPAR SAE 75W-70, APIGL-4. Specification: 9.55550-MZ14 S
Brake Fluid Hydraulic Brake Circuit 1.76 QTS. 1.66 L MOPAR DOT 4, ISO 4925, Class 6, SAE J1704. DOT 4 Brake Fluid S
Engine Coolant Cooling System 1.72 GALS. 6.51 L MOPAR Antifreeze/Coolant 10 year 150,000 Mile Formula PARAFULL OAT (Organic Additive Technology) Meeting the requirements of manufacturer Material Standard MS. 90032 This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. S
Windshield Washer Fluid 0.40 GALS. 1.51 L MOPAR Mixture of alcohol, water and surfactantants CUNA NC 956-II S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.