Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Fiat 500X PopFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATION
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER* |
|---|---|---|---|---|
| Intermediate Shaft to Steering Gear Bolt | 60 | 44 | - | X |
| Outer Tie Rod End to Steering Knuckle Nut | 40 | 30 | - | X |
| Steering Column to Dash Frame Bolts | 20 | 15 | - | |
| Steering Column to Dash Frame Nuts | 20 | 15 | - | X |
| Steering Gear to Crossmember | 110 | 81 | - | |
| Steering Wheel to Column Nut | 50 | 37 | - | |
| Tie Rod Jam Nut | 56 | 41 | - | |
| * NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.