Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Fiat 500X PopFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 1.70 OZS. | 0.05 L | PAG 46 | S | |||
| Air Cond Refrigerant | 0.88 LBS. | 0.39 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Service Fill | 6.35 QTS. | 6 L | MOPAR ZF 8&9 Speed Automatic Transmission Fluid | S | ||
| Brake Fluid | N/A | N/A | MOPAR Brake Fluid DOT 4 | If DOT 4 Brake Fluid is not available, then DOT 3 is acceptable. | S | ||
| Differential Gear Oil | Rear | 0.63 QTS. | 0.59 L | MOPAR Rear Axle/RDM Synthetic Axle Lubricant API - GL5, SAE 75W-90 | S | ||
| Engine Coolant | 8.80 QTS. | 8.32 L | MOPAR Antifreeze/Coolant 10 year 150,000 Mile Formula PARAFULL OAT (Organic Additive Technology) | System fill capacity includes heater and coolant recovery bottle filled to MAX level. Meeting the requirements of Chrysler Material Standard MS-90032. | S | ||
| Engine Oil | w/Filter | 4.80 QTS. | 4.54 L | SAE 0W-30 SN PLUS API Certified Synthetic Engine Oil, meeting requirements of FCA Material Standard MS-13340 | S | ||
| Fuel Tank | 12.70 GALS. | 48.07 L | S | ||||
| Transfer Case Fluid | Power Transfer Unit | 0.42 QTS. | 0.39 L | MOPAR Front Axle/PTU Synthetic Axle Lubricant API - GL5, SAE 75W-90 | S | ||
| Windshield Washer Fluid | N/A | N/A | S | ||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.