2021 Fiat 500X PopFACTORY OEM SERVICE PROCEDURE

Capacities And Recommended Fluids: Specifications

1.3L ENGINE

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 4.5 Quarts / 4.3 Liters We recommend you use SAE 0W-30 SN PLUS API Certified Synthetic Engine Oil, meeting the requirements of FCA Material Standard MS-13340 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 68291576AA N/A
Cooling System * 8.8 Quarts / 8.3 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 12.7 Gallons / 48 Liters 87 Octane (R+M)/2, 0-15% Ethanol. - -
Spark Plugs GAP We recommend you use Mopar Spark Plugs. - -
0.026 in / 0.65 mm
* Includes heater and coolant reservoir filled to MAX level.
A/C REFRIGERANT SYSTEM

Description Capacities Type Part Number Global Part Number
Refrigerant - Before 3/15/19 0.92 Pounds / 0.420 Kilograms Use only refrigerant R-1234yf 68224028AA 68224028GA
Refrigerant - On and After 3/15/19 0.88 Pounds / 0.400 Kilograms Use only refrigerant R-1234yf 68224028AA 68224028GA
TRANSMISSION

Description Type Capacity Part Number Global Part Number
U.S. Metric
948TE Automatic Transaxle Use only Mopar ZF 8&9 Speed ATF™ Automatic Transmission Fluid, 9.55550-AV5 or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 6.35 Quarts 6.0 Liters 68218925AA 68218925GA
948TE Overhaul Fill Refer to FLUID AND FILTER, STANDARD PROCEDURE .
CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
Axles 
Rear Differential (RDM) The use of SAE 75W-90 API GL5 grade synthetic lubricant is recommended. FIAT 9.55550-DA6 classification 0.63 Quarts 0.6 Liters 68280933AA -
Transfer Case 
Power Transfer Unit (PTU) The use of SAE 75W-90 API GL5 grade synthetic lubricant is recommended. FIAT 9.55550-DA6 classification 0.42 Quarts 0.4 Liters 68280932AA -
Chassis Systems 
Brake Master Cylinder We recommend you use Mopar DOT 4. If DOT 4 brake fluid is not available, then DOT 3 is acceptable. DOT 4 brake fluid must be changed every 2 years regardless of mileage. N/A N/A 04549625AD 04549625GD
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.