2018 Fiat 500L LoungeFACTORY OEM SERVICE PROCEDURE

Torque Specifications

TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENT
Knee Airbag Mounting Screw 8 - 71  
Knee Airbag Bracket Mounting Screw 8 - 71  
Passenger Airbag Lower Bracket Mounting Screw 8 - 71  
Seat Airbag Mounting Nut 8 - 71  
Side Curtain Airbag Mounting Screw 8 - 71  
Front Seat Belt Anchor Tensioner Mounting Screw 40 30 -  
Front Seat Belt Buckle Mounting Screw 40 30 -  
Rear Seat Belt Buckle Mounting Screw 40 30 -  
Clockspring Tension Clamp Screw 5 - 44  
Occupant Restraint Controller Mounting Nuts 8 - 71  
Front Seat Belt Retractor Mounting Screw 40 30 -  
Front Seat Belt Turning Loop Mounting Screw 40 30 -  
Rear Seat Belt Retractor Mounting Screw 40 30 -  
Rear Seat Belt Turning Loop Mounting Screw 40 30 -  
Rear Seat Belt Lower Anchor Mounting Screw 40 30 -  
Front Impact Sensor Mounting Nut 8 - 71  
Side Impact Sensor (B-Pillar) Mounting Nut 9 - 80  
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.