Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Programming Keys To The BCM
Key, Fobs and BCM can only be ordered through the dealer parts department.
The Body Control Module (BCM) may be programmed to recognize up to a total of eight key fobs. When replacing or adding a key fob, the replacement/additional key fob must be ordered through your parts department by VIN. The new key will arrive within 24 hours cut to match the door lock cylinder in the vehicle for which it will be used. Once the new key fob arrives, the BCM must be programmed to recognize it as a valid key fob.
All key fobs to be used on this vehicle must be present with the vehicle when programming a new key. Every key must be reprogrammed at this time. Any key not reprogrammed at this time will be locked out from that BCM forever and will no longer function.
- Turn the ignition on.
- With the scan tool select BCM.
- With the scan tool select; "Misc. Functions" "Erase and Program Keys".
- Press "Continue" and follow the instructions on the screen.
The 5 digit Electronic ID must be entered when running this procedure. The Electronic ID can be found on the customer owned "Electronic ID card" or in the DealerCONNECT -> Parts section.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
