Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Fiat 500c Pop, Automatic TransFACTORY OEM SERVICE PROCEDURE
Engine Cooling System: Specifications: Torque
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accessory Drive Belt Tensioner Bolt | 26 | 19 | - |
| Block Heater | 2 | - | 21 |
| Condenser to Radiator | 8 | - | 70 |
| Coolant Reservoir | 8 | - | 70 |
| Coolant Return Tube to Water/Coolant Pump Inlet Pipe | 45 | 33 | - |
| Coolant Return Tube to Oil Filter Housing | 40 | 30 | - |
| Coolant Supply Tube to Oil Filter Housing | 9 | - | 80 |
| Coolant Supply Tube to Thermostat Housing | 9 | - | 80 |
| Engine Coolant Temperature (ECT) Sensor | 20 | 15 | - |
| Fan Shroud to Radiator Mounting | 8 | - | 70 |
| Radiator Lower Isolator Bracket to Crossmember | 8 | - | 70 |
| Thermostat Housing | 10 | - | 89 |
| Water/Coolant Pump Bolts and Nut | 10 | - | 89 |
| Water/Coolant Pump Inlet Tube | 9 | - | 80 |
| Water/Coolant Pump Inlet Pipe Support Bracket Bolt | 10 | - | 89 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.