2012 Fiat 500 GucciFACTORY OEM SERVICE PROCEDURE

Capacities And Recommended Fluids: Specifications: Specifications

ENGINE

Description  Type  Part Number  Capacities 
U.S.  Metric 
Cooling System 
? Engine Coolant (1.4L Engine) MOPAR® Antifreeze/Coolant 10 Year 150, 000 Mile Formula PARAFULL OAT (Organic Additive Technology) 68104496AA (concentrate) 4.6 Quarts 4.4 Liters
68104494AA (50/50)
Engine Oil with Filter 
Engine Oil (1.4L Engine) MOPAR® API Certified SAE 5W-30 engine oil, meeting the requirements of Chrysler Group LLC Material Standard MS-6395. 1 Quart - 4761 838AB 4 Quarts 3.8 Liters
1 Gallon- 4761 844AB
Engine Oil Filter (1.4L Engine) MOPAR® Engine Oil Filter 73500049 N/A N/A
Fuel (approximate) 
Fuel Selection (1.4L Engine) 87 Octane Acceptable - 91 Octane Recommended N/A 10.5 Gallons 40 Liters
A/C Refrigerant System 
A/C Refrigerant R-134a 82300101AB 17 Ounces 482 Grams
 
? System fill capacity includes heater and coolant recovery bottle filled to MAX level.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

SPARK PLUGS

Description  Type  Part Number  Gap
U.S.  Metric 
Spark Plugs (1.4L Engine) NGK® DCPR7E-N-10 0.040 in 1.00 mm
TRANSMISSION

Description  Type  Part Number  Capacities 
U.S.  Metric 
Manual 
C514 - Service Fill Castrol BOT 350 M3 1 Quart - 68092630AA. P/N 1.8 Quarts 1.7 Liters
 
 
AW60T - Service Fill Mopar® AW1 1 Quart - 68092912AA. P/N 6.6 Quarts 6.2 Liters
AW60T - Service Fill Mopar® AW1 1 Gallon - 68092913AA. P/N N/A
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

CHASSIS

Description  Type  Part Number  Capacities 
U.S.  Metric 
Chassis Systems 
Brake Master Cylinder MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
 
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.