1978 Fiat 128 Base, 2D HatchbackFACTORY OEM SERVICE PROCEDURE

MARELLI Single/Dual Breaker Point Distributors: Description

Distributors may be single or dual breaker point type. Centrifugal advance is accomplished with conventional weights and springs which may be located either beneath breaker plate or at top of distributor shaft. On distributor with top mounted centrifugal advance, the rotor also serves as a cover for the advance mechanism. Distributors may or may not be equipped with a vacuum advance device.

On dual breaker point systems, one set is used for normal operation. The second set is used for cold engine starting and additional spark advance. A control circuit activates the advance breaker set for cold start operation and then switches ignition circuit to the other breaker set for normal operation.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.