LUBRICATION SPECIFICATIONS

Material

Condition

Specification

Engine Oil ⁽¹⁾

Ambient Temperature Less Than -23°F (-10°C) To 62°F (16°C)

SAE 5W-30

Engine Oil ⁽¹⁾

Ambient Temperature Above -23°F (-10°C) To Over 120°F (50°C)

SAE 10W-30

Engine Oil ⁽¹⁾

Ambient Temperature Above 32°F (0°C) To Over 120°F (50°C)

SAE 20W-40

Engine Coolant

All

50/50 Mixture Of Distilled Water & Ethylene Glycol

Power Steering Fluid

All

Automatic Transmission Fluid "DEXRON II"

Clutch Fluid

All

DOT 3 Or DOT 4

Differential (Rear Axle)

All

API Classification GL-5 Or Higher ⁽²⁾

Brake Fluid

All

DOT 3 Or DOT 4

Transfer Oil

All

API Classification GL-4 SAE 75W-90 Or 75W-85W

Automatic Transaxle Fluid

All

Diamond ATF SPII Or Equivalent

Manual Transaxle Fluid

All

API Classification GL-4 SAE 75W-90 Or 75W-85W

A/C Refrigerant

All

HFC-134a

Door Hinges, Rear Hatch Hinges

All

Engine Oil

Transaxle Linkage, Parking BrakeCable Mechan- ism, Hood Lock & Hook,Door Latches Seat Adjusters

All

Multipurpose Grease NLGI Grade 2

⁽¹⁾	SAE 5W-30 is highly preferred.

⁽²⁾	SAE 90, 85W-90, & 80W-90 may be used if temperatures are above -10°F (-23°C). SAE 80W & 80W-90 may be used if temperatures are from -30°F (-34°C) to -10°F (-23°C). SAE 75W may be used if temperatures are below -30°F (-34°C).

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Lubrication Specifications

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?