Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Eagle Talon Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Diagnostic Trouble Code (DTC) Identification: Notes
DTC CODES IDENTIFICATION & DTC TESTS
| DTC In General Scan Tool Mode | System Malfunction | DTC Test No. |
|---|---|---|
| P0100 | Volume Airflow Sensor | 1 |
| P0105 | Barometric Pressure Senso | 2 |
| P0110 | Intake Air. Temp. Sensor | 3 |
| P0115 | Engine Coolant Temp. Sensor | 4 |
| P0120 | Throttle Position Circuit | 5 |
| P0125 | Excessive Time To Enter Closed Loop | 6 |
| P0130 | Front Oxygen Sensor | 7 |
| P0135 | Front Oxygen Sensor Heater | 8 |
| P0136 | Rear Oxygen Sensor | 9 |
| P0141 | Rear Oxygen Sensor Heater | 10 |
| P0170 | Fuel Trim Malfunction | 11 |
| P0201 | No. 1 Injector Circuit | 12 |
| P0202 | No. 2 Injector Circuit | 12 |
| P0203 | No. 3 Injector Circuit | 12 |
| P0204 | No. 4 Injector Circuit | 12 |
| P0300 | Random Misfire | 13 |
| P0301 | Cylinder No. 1 Misfire | 14 |
| P0302 | Cylinder No. 2 Misfire | 14 |
| P0303 | Cylinder No. 3 Misfire | 14 |
| P0304 | Cylinder No. 4 Misfire | 14 |
| P0325 | Knock Sensor | 15 |
| P0335 | Crankshaft Position Sensor | 16 |
| P0340 | Camshaft Position Sensor | 17 |
| P0400 | EGR Malfunction | 18 |
| P0403 | EGR Solenoid | 19 |
| P0420 | Catalytic System Efficiency | 20 |
| P0440 | EVAP Emission Control System | 21 |
| P0443 | EVAP Purge Solenoid | 22 |
| P0500 | Vehicle Speed Sensor | 23 |
| P0505 | Idle Control System | 24 |
| P0510 | Closed Throttle Position Switch | 25 |
| P0700 | Transaxle Control System | 26 |
| P0705 | Transaxle Range Sensor | 27 |
| P1103 | Turbocharger Wastegate Actuator | 28 |
| P1104 | Turbocharger Wastegate Solenoid | 29 |
| N/A | Fuel Pressure Solenoid | 30 |
| P1400 | Manifold Differential Pressure Sensor | 31 |
| P1500 | Generator FR Terminal Circuit | 32 |
| P1600 | Serial Communication Link | 33 |
| P1715 | Pulse Generator Assembly | 34 |
| P1750 | Solenoid Assembly Malfunction | 35 |
| P1791 | Engine Coolant Temp. Level Input To TCM | 36 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.