BATTERY SPECIFICATIONS

Application & Group	Cold Cranking Amps	Amp Hr. Rating
2.0L Turbo (Group 86)	430	55

FLUID CAPACITIES

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

4.6 Qts. (4.4L)

Cooling System ⁽³⁾

7.4 Qts. (7.0L)

A/T (Mopar ATF Plus Type 7176)

Drain & Refill

⁽⁴⁾

Dry Refill

7.1 Qts. (6.7L)

Manual Transaxle (SAE 75W-90/API GL-4)

All-Wheel Drive

2.3 Qts. (2.2L)

Except All-Wheel Drive

2.1 Qts. (1.9L)

Transfer Case (SAE 75W-90/API GL-4)

Turbo All-Wheel Drive

1.1Pts. (.51L)

Rear Differential (SAE 75W-90/API GL-5)

Turbo All-Wheel Drive

1.8 Pts. (.85L)

Power Steering Fluid (Mopar ATF Plus Type 7176)

1.9 Pts. (.9L)

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use engine oil with API SH ECII, SH/CD ECII, SG ECII or SG/CD ECII rating.

⁽³⁾	Quantity includes heater and coolant recovery tank.

⁽⁴⁾	Capacity not available. Fill to COLD mark. Start engine and operate for 2 minutes. Shift through all gears and recheck fluid level with shift lever in Neutral.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Engine Controls - Specifications - Turbo: Capacities