Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Eagle Vision V6-201 3.3LFACTORY OEM SERVICE PROCEDURE
Transaxle Specifications
42LE FOUR SPEED AUTOMATIC TRANSAXLE
SPECIFICATIONS
Type: Longitudinally Mounted, Fully-Adaptive, Electronically Controlled, Four Speed Automatic. Electronically Modulated Torque Converter Clutch. Separate Sump Differential.
Torque Converter Diameter 254 mm (10 inches)
Oil Capacity:
Transmission and Torque Converter Sump 9.4 Litres (9.9 Quarts)
Differential Sump 0.95 Litres (1.0 Quarts)
Oil Type:
Transmission and Torque Converter Sump MOPAR ATF Type 9602 ONLY
Differential Sump 80W-90 Petroleum Based Hypoid Gear Lube
Cooling Method Water Heat Exchanger
Lubrication Pump (Internal-External Gear Type)
Gear Ratios (Transmission Portion):
First 2.84
Second 1.57
Third 1.00
Fourth(OD) 0.69
Reverse 2.21
Overall Top Gear Ratio (in Overdrive): 2.52
Teeth Per Gear (Sprocket):
Front Sun Gear 28
Front Planetary Gear 17
Front Annulus Gear 62
Rear Sun Gear 38
Rear Planetary Gear 17
Rear Annulus Gear 70
Output Shaft Sprocket 32
Transfer Shaft Sprocket 33
Transfer Shaft Pinion Head 11
Ring Gear (Differential) 39
Side Gear (Differential) 16
Clutch Clearances:
Underdrive Clutch 0.091-1.47 mm (0.036-0.058 in.)
Overdrive Clutch 0.965-2.26 mm (0.038-0.089 in.)
Reverse Clutch 0.760-1.24 mm (0.030-0.049 in.)
2/4 Clutch 0.760-2.64 mm (0.030-0.104 in.)
Low/Reverse Clutch 1.040-1.65 mm (0.042-0.065 in.)
Pump Clearances:
Outer Gear to Pocket 0.045-0.141 mm (0.0018-0.0056 in.)
Outer Gear Side Clearance 0.020-0.046 mm (0.0008-0.0018 in.)
Inner Gear Side Clearance 0.020-0.046 mm (0.0008-0.0018 in.)
Tapered Roller Bearing Settings:
Output Shaft 1 - 8 in. lbs of Turning Torque
Transfer Shaft 6 - 12 in. lbs of Turning Torque
Differential 19 - 23 in. lbs of Turning Torque
Hypoid Gear Set
(Ring and Pinion) Backlash 0.152 - 0.229 mm (0.006-0.009 in.)
SPECIFICATIONS
Type: Longitudinally Mounted, Fully-Adaptive, Electronically Controlled, Four Speed Automatic. Electronically Modulated Torque Converter Clutch. Separate Sump Differential.
Torque Converter Diameter 254 mm (10 inches)
Oil Capacity:
Transmission and Torque Converter Sump 9.4 Litres (9.9 Quarts)
Differential Sump 0.95 Litres (1.0 Quarts)
Oil Type:
Transmission and Torque Converter Sump MOPAR ATF Type 9602 ONLY
Differential Sump 80W-90 Petroleum Based Hypoid Gear Lube
Cooling Method Water Heat Exchanger
Lubrication Pump (Internal-External Gear Type)
Gear Ratios (Transmission Portion):
First 2.84
Second 1.57
Third 1.00
Fourth(OD) 0.69
Reverse 2.21
Overall Top Gear Ratio (in Overdrive): 2.52
Teeth Per Gear (Sprocket):
Front Sun Gear 28
Front Planetary Gear 17
Front Annulus Gear 62
Rear Sun Gear 38
Rear Planetary Gear 17
Rear Annulus Gear 70
Output Shaft Sprocket 32
Transfer Shaft Sprocket 33
Transfer Shaft Pinion Head 11
Ring Gear (Differential) 39
Side Gear (Differential) 16
Clutch Clearances:
Underdrive Clutch 0.091-1.47 mm (0.036-0.058 in.)
Overdrive Clutch 0.965-2.26 mm (0.038-0.089 in.)
Reverse Clutch 0.760-1.24 mm (0.030-0.049 in.)
2/4 Clutch 0.760-2.64 mm (0.030-0.104 in.)
Low/Reverse Clutch 1.040-1.65 mm (0.042-0.065 in.)
Pump Clearances:
Outer Gear to Pocket 0.045-0.141 mm (0.0018-0.0056 in.)
Outer Gear Side Clearance 0.020-0.046 mm (0.0008-0.0018 in.)
Inner Gear Side Clearance 0.020-0.046 mm (0.0008-0.0018 in.)
Tapered Roller Bearing Settings:
Output Shaft 1 - 8 in. lbs of Turning Torque
Transfer Shaft 6 - 12 in. lbs of Turning Torque
Differential 19 - 23 in. lbs of Turning Torque
Hypoid Gear Set
(Ring and Pinion) Backlash 0.152 - 0.229 mm (0.006-0.009 in.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
