Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Eagle Talon Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Diagnostic Trouble Code (DTC) Identification: Notes
NOTE:
Some DTCs may not apply to this model.
DTC CODES IDENTIFICATION & DTC TESTS
| DTC In General Scan Tool Mode | DTC In DRB-III Scan Tool Mode | DTC TestNo. | System Malfunction | ||
|---|---|---|---|---|---|
| P0100 | P0100 | 1 | Volume Airflow Sensor | ||
| P0105 | P0105 | 2 | Barometric Pressure Senso | ||
| P0110 | P0110 | 3 | Intake Air. Temp. Sensor | ||
| P0115 | P0115 | 4 | Engine Coolant Temp. Sensor | ||
| P0120 | P0120 | 5 | Throttle Position Circuit | ||
| P0125 | (1) | 6 | Excessive Time To Enter Closed Loop | ||
| P0130 | (1) | 7 | Front Oxygen Sensor | ||
| P0135 | (1) | 8 | Front Oxygen Sensor Heater | ||
| P0136 | (1) | 9 | Rear Oxygen Sensor | ||
| P0141 | (1) | 10 | Rear Oxygen Sensor Heater | ||
| P0170 | (1) | 11 | Fuel Trim Malfunction | ||
| P0201 | P0201 | 12 | No. 1 Injector Circuit | ||
| P0202 | P0202 | 12 | No. 2 Injector Circuit | ||
| P0203 | P0203 | 12 | No. 3 Injector Circuit | ||
| P0204 | P0204 | 12 | No. 4 Injector Circuit | ||
| P0300 | (1) | 13 | Random Misfire | ||
| P0301 | (1) | 14 | Cylinder No. 1 Misfire | ||
| P0302 | (1) | 14 | Cylinder No. 2 Misfire | ||
| P0303 | (1) | 14 | Cylinder No. 3 Misfire | ||
| P0304 | (1) | 14 | Cylinder No. 4 Misfire | ||
| P0325 | P0325 | 15 | Knock Sensor | ||
| P0335 | P0335 | 16 | Crankshaft Position Sensor | ||
| P0340 | P0340 | 17 | Camshaft Position Sensor | ||
| P0400 | (1) | 18 | EGR Malfunction | ||
| P0403 | (1) | 19 | EGR Solenoid | ||
| P0420 | (1) | 20 | Catalytic System Efficiency | ||
| P0440 | (1) | 21 | EVAP Emission Control System | ||
| P0443 | (1) | 22 | EVAP Purge Solenoid | ||
| P0500 | P0500 | 23 | Vehicle Speed Sensor | ||
| P0505 | (1) | 24 | Idle Control System | ||
| P0510 | (1) | 25 | Closed Throttle Position Switch | ||
| P0700 | (1) | 26 | Transaxle Control System | ||
| P0705 | (1) | 27 | Transaxle Range Sensor | ||
| P0710 | (1) | 28 | Transaxle Fluid Temp. Sensor | ||
| P1103 | (1) | 29 | Turbocharger Wastegate Actuator | ||
| P1104 | (1) | 30 | Turbocharger Wastegate Solenoid | ||
| P1105 | (1) | 31 | Fuel Pressure Solenoid | ||
| P1300 | P1300 | 32 | Ignition Timing Adjustment Circuit | ||
| P1400 | (1) | 33 | Manifold Differential Pressure Sensor | ||
| P1500 | P1500 | 34 | Generator FR Terminal Circuit | ||
| P1715 | (1) | 35 | Pulse Generator Assembly | ||
| P1750 | (1) | 36 | Solenoid Assembly Malfunction | ||
|
|||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.