Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Eagle Summit DLFACTORY OEM SERVICE PROCEDURE
Service Intervals & Specifications
REPLACEMENT INTERVALS
| Component | Miles | |||
|---|---|---|---|---|
| Expo & Summit Wagon | ||||
| Air Filter | 30,000 | |||
| Automatic Transaxle Fluid | 30,000 | |||
| Coolant | 30,000 | |||
| Oil | 7500 | |||
| Oil Filter | 15,000 | |||
| Spark Plugs | 30,000 | |||
| Spark Plug Wires | 60,000 | |||
| Timing Belt | 60,000 | |||
| Galant | ||||
| Air Filter | 30,000 | |||
| Automatic Transaxle Fluid | 30,000 | |||
| Coolant | 30,000 | |||
| Oil | 7500 | |||
| Oil Filter | 15,000 | |||
| Spark Plugs | 30,000 | |||
| Spark Plug Wires | 60,000 | |||
| Timing & Balance Shaft Belts | 60,000 | |||
| Pickup | ||||
| Air Filter | 30,000 | |||
| Coolant | 30,000 | |||
| EGR Valve (1) | 100,000 | |||
| Oil | 7500 | |||
| Oil Filter | 15,000 | |||
| O2 Sensor (1) | 80,000 | |||
| Rear Axle Fluid | 30,000 | |||
| Spark Plugs | 30,000 | |||
| Spark Plug Wires | 60,000 | |||
| Timing Belt | 60,000 | |||
| Vapor Canister (1) | 100,000 | |||
|
||||
DRIVE BELT ADJUSTMENT
| Application | (1) Deflection New Belt - In. (mm) | (1) Deflection Used Belt - In. (mm) | ||||||
|---|---|---|---|---|---|---|---|---|
| Expo & Summit Wagon | ||||||||
| Alternator | .30-.35 (7.6-9.0) | .39 (10.0) | ||||||
| P/S | ||||||||
| 8-Valve | .18-.26 (4.5-6.6) | .26-.35 (6.5-9.0) | ||||||
| 16-Valve | .18-.22 (4.5-5.6) | .24-.28 (6.0-7.0) | ||||||
| A/C | .17-.19 (4.3-4.8) | .21-.24 (5.3-6.0) | ||||||
| Galant | ||||||||
| Alternator | .30-.35 (7.5-8.8) | .39 (10.0) | ||||||
| A/C | .22-.24 (5.5-6.0) | .26-.30 (6.5-7.6) | ||||||
| P/S | .18-.22 (4.5-5.6) | .24-.28 (6.0-7.0) | ||||||
| Pickup | ||||||||
| Alternator | (2) | .28-.39 (7.0-10.0) | ||||||
| P/S | (2) | .23-.35 (5.8-8.8) | ||||||
| A/C | (2) | .33-.39 (8.3-10.0) | ||||||
|
||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.