Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Eagle Vision V6-201 3.3LFACTORY OEM SERVICE PROCEDURE
Sensor Resistance Values
Temperature Resistance (k-ohms)
-40° F 291.49 to 381.71
-4° F 85.85 to 108.39
14° F 49.25 to 61.43
32° F 29.33 to 35.99
50° F 17.99 to 21.81
68° F 11.37 to 13.61
77° F 9.12 to 10.88
86° F 7.37 to 8.75
104° F 4.90 to 5.75
122° F 3.33 to 3.88
140° F 2.31 to 2.67
158° F 1.63 to 1.87
176° F 1.17 to 1.34
194° F .86 to .97
212° F .68 to .72
230° F .48 to .54
248° F .37 to .41
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.