Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Eagle Vision V6-201 3.3LFACTORY OEM SERVICE PROCEDURE
System Specifications
Refrigerant
Capacity 1.75 lbs
Type R-134a
Oil Viscosity [02]
Total System Oil Capacity 5.0 oz.
Compressor Oil Check [01]
Compressor Clutch Air Gap 0.014 -0.026 in.
[01] -- Oil Level cannot be checked.
[02] -- Use a polyalkalene glycol (PAG) lubricant ND8 or part No. 82300102, or equivalent, approved for use with R-134a refrigerant systems.
Capacity 1.75 lbs
Type R-134a
Oil Viscosity [02]
Total System Oil Capacity 5.0 oz.
Compressor Oil Check [01]
Compressor Clutch Air Gap 0.014 -0.026 in.
[01] -- Oil Level cannot be checked.
[02] -- Use a polyalkalene glycol (PAG) lubricant ND8 or part No. 82300102, or equivalent, approved for use with R-134a refrigerant systems.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.