Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Eagle Vision V6-201 3.3LFACTORY OEM SERVICE PROCEDURE
Compressor HVAC
Compressor 10PA17-R-134a [01][02]
Evaporator Oil Charge 2.0 oz.
Condenser Oil Charge 1.0 oz.
Receiver-Dryer Oil Charge 2.0 oz.
Lines Oil Charge 1.5 oz.
[01] -- When components of an A/C system utilizing R-134a refrigerant are replaced, use only ND8 PSG compressor oil No. 82300101, or equivalent.
[02] -- The 10PA17-R12 compressor looks the same and has the same bolt pattern as the 10PA17-R134a compressor. Ensure Proper compressor is used when replacement is necessary.
Evaporator Oil Charge 2.0 oz.
Condenser Oil Charge 1.0 oz.
Receiver-Dryer Oil Charge 2.0 oz.
Lines Oil Charge 1.5 oz.
[01] -- When components of an A/C system utilizing R-134a refrigerant are replaced, use only ND8 PSG compressor oil No. 82300101, or equivalent.
[02] -- The 10PA17-R12 compressor looks the same and has the same bolt pattern as the 10PA17-R134a compressor. Ensure Proper compressor is used when replacement is necessary.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.