1994 Eagle Summit LX, AutomaticFACTORY OEM SERVICE PROCEDURE

Window Switch Continuity Charts

MASTER WINDOW SWITCH CONTINUITY (COLT, MIRAGE & SUMMIT)

Switch Position (1) Check Continuity Between
Normal Position
Left Front OFF Pins 2, 3 & 10
Left Rear OFF Pins 1, 3 & 7
Left Front UP Pins 2 & 4; Pins 3 & 10
Left Rear UP Pins 1 & 3; Pins 4 & 7
Left Front DOWN Pins 2 & 3; Pins 4 & 10
Left Rear DOWN Pins 1 & 4; Pins 3 & 7
Right Front OFF Pins 3, 5 & 11
Right Rear OFF Pins 3, 6 & 14
Right Front UP Pins 3 & 5; Pins 4 & 11
Right Rear UP Pins 3 & 14; Pins 4 & 6
Right Front DOWN Pins 3 & 11; Pins 4 & 5
Right Rear DOWN Pins 3 & 6; Pins 4 & 14
Lock Position
Left Front OFF Pins 2, 3 & 10
Left Rear OFF Pins 1 & 7
Left Front UP Pins 2 & 4; Pins 3 & 10
Left Rear UP Pins 4 & 7
Left Front DOWN Pins 2 & 3; Pins 4 & 10
Left Rear DOWN Pins 1 & 4
Right Front OFF Pins 5 & 11
Right Rear OFF Pins 6 & 14
Right Front UP Pins 4 & 11
Right Rear UP Pins 4 & 6
Right Front DOWN Pins 4 & 5
Right Rear DOWN Pins 4 & 14
(1) Left side of vehicle refers to driver's side.
PASSENGER SIDE WINDOW SWITCH CONTINUITY (COLT, MIRAGE & SUMMIT)

Switch Position Check Continuity Between
OFF Pins 1 & 2; Pins 3 & 6
UP Pins 2 & 4; Pins 3 & 6
DOWN Pins 1 & 2; Pins 3 & 4
MASTER WINDOW SWITCH CONTINUITY (COLT VISTA, EXPO LRV & SUMMIT WAGON)

Switch Position (1) Check Continuity Between
Normal Position
Left Front OFF Pins 1, 2 & 9
Left Front UP Pins 1 & 9; Pins 2 & 6
Left Front DOWN Pins 1 & 6; Pins 2 & 9
Right Front OFF Pins 5, 8 & 9
Right Front UP Pins 5 & 6; Pins 8 & 9
Right Front DOWN Pins 5 & 9; Pins 6 & 8
Lock Position
Left Front OFF Pins 1, 2 & 9
Left Front UP Pins 1 & 9; Pins 2 & 6
Left Front DOWN Pins 1 & 6; Pins 2 & 9
Right Front OFF Pins 5 & 8
Right Front UP Pins 5 & 6
Right Front DOWN Pins 6 & 8
(1) Left side of vehicle refers to driver's side.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.