1992 Eagle Talon FWD L4-1997cc 2.0L DOHCFACTORY OEM SERVICE PROCEDURE

Incorrect Air/Fuel Mixture


SYMPTOM
Engine runs normally but the air/fuel mixture is either rich or lean.

CAUSE (BY SYSTEM/COMPONENT):

FUEL SYSTEMS
- For water contaminated fuel.
- Fuel system pressure.
- TPS for sticking or binding.
- For a faulty in-tank fuel pump check valve which would allow the fuel in the lines to drain back to the tank after the engine is stopped.

EMISSION SYSTEMS
- EGR operation. Valve should be fully seated closed with engine "OFF".


IGNITION SYSTEMS
- Proper sparking voltage and duration.
- Worn distributor shaft.
- Bare and shorted wires.
- Improper pickup coil resistance or poor connections.
- Loose ignition coil connections.
- Moisture in distributor cap.
- Spark plugs for wetting, cracks, wear, improper gap, burned electrodes, or heavy deposits.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.