Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Eagle Talon Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Laser & Talon
WHEEL ALIGNMENT SPECIFICATIONS (LASER & TALON)
| Adjustment | Application | Preferred | Range | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Camber - Front (1) | 1.8L 2WD | 0.23 | -0.27 To 0.73 | ||||||
| Camber - Front (1) | 2.0L 2WD | 0.8 | 0.3 To 1.3 | ||||||
| Camber - Front (1) | 2.0L AWD | 0.17 | -0.33 To 0.67 | ||||||
| Camber - Rear (1) | 2WD | -0.75 | -1.25 To -0.25 | ||||||
| Camber - Rear (1) | AWD | -1.55 | -2.05 To -1.05 | ||||||
| Caster (1)(2) | 1.8L 2WD | 2.33 | 1.83 To 2.83 | ||||||
| Caster (1)(2) | 2.0L 2WD | 2.4 | 1.9 To 2.9 | ||||||
| Caster (1)(2) | 2.0L AWD | 2.3 | 1.8 To 2.8 | ||||||
| Toe-In - Rear (1) | Except AWD | 0 | -0.24 To 0.24 | ||||||
| Toe-In - Rear (1) | AWD | 0.28 | 0.04 To 0.52 | ||||||
| Toe-In - Rear (1) | AWD (1993) | 0.14 | 0.02 To 0.26 | ||||||
| Toe-In - Rear (3) | Except AWD | 0 | -.12 To .12 (-3 To 3) | ||||||
| Toe-In - Rear (3) | AWD | 0.14 (3.5) | .02 To .26 (.5 To 6.5) | ||||||
|
|||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.