1992 Eagle Summit Wagon Base, 1.8 D, StandardFACTORY OEM SERVICE PROCEDURE

Alignment Specifications

ALIGNMENT SPECIFICATIONS (COLT, COLT 200, MIRAGE & SUMMIT)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -2/3 -1 1/8 To -1/8
Caster (1) 2 1/3 1 3/4 To 2 3/4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -3/4 To 3/4
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -3/8 To 3/8 (-5 To 5)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (DIAMANTE)

Application Preferred Range
Camber (1) 0 -1/2 To 1/2
Caster (1) 2 7/16 1 15/16 To 2 15/16
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -1/8 To 1/8
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (ECLIPSE)

Application Preferred Range
1.8L
Camber (1)
Front 1/4 -1/4 To 3/4
Rear -3/4 -1 1/4 To -1/4
Caster (1) 2 5/16 1 13/16 To 2 13/16
Toe-In (1) 0 -1/4 To 1/4
Toe-In (2) 0 (0) -1/8 To 1/8 (-3 To 3)
2.0L
2WD
Camber (1)
Front 1/16 -7/16 To 9/16
Rear -3/4 -1 1/4 To -1/4
Caster (1) 2 3/8 1 7/8 To 2 7/8
Toe-In (1) 0 -1/4 To 1/4
Toe-In (2) 0 (0) -1/8 To 1/8 (-3 To 3)
AWD
Camber (1)
Front 3/16 -5/16 To 11/16
Rear -1 1/2 -1 To -2
Caster (1) 2 1/4 1 3/4 To 2 3/4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/4 0 To 1/2
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/8 (3) 0 To 1/4 (0 To 6)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (COLT VISTA, EXPO, SUMMIT WAGON)

Application Preferred Range
2WD
Camber (1)
Front 1/3 -1/8 To 7/8
Rear -1/2 -1 To 0
Caster (1) 2 1/8 1 5/8 To 2 5/8
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/8 0 To 1/4
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/16 (2) 0 To 1/8 (0 To 3)
AWD
Camber (1)
Front 2/3 1/8 To 1 1/8
Rear -1/2 -1 To 0
Caster (1) 2 1 1/2 To 2 1/2
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/8 0 To 1/4
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/16 (2) 0 To 1/8 (0 To 3)
Toe-Out On Turns (1)
Inner 34 1/2 To 38 1/2 N/A
Outer 30 1/2 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (GALANT)

Application Preferred Range
2WD
Camber (1)
Front 3/8 -1/8 To 7/8
Rear -3/4 -1 1/4 To -1/4
Caster (1) 2 1 1/2 To 2 1/2
Toe-In (1) 0 -1/4 To 1/4
Toe-In (2) 0 (0) -1/8 To 1/8 (-3 To 3)
AWD
Camber (1)
Front 1/2 0 To 1
Rear -1 -1 1/2 To -1/2
Caster (1) 1 1/2 1 To 2
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/4 0 To 1/2
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/8 (3) 0 To 1/4 (0 To 6)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (MONTERO)

Application Preferred Range
Camber (Front) (1) 5/8 1/8 To 1 1/8
Caster (1) 3 2 To 4
Toe-In (Front) (1) 1/4 0 To 1/2
Toe-In (Front) (2) 1/8 (3) 0 To 1/4 (0-6)
Toe-Out On Turns (1)
Inner 21 9/16 N/A
Outer 20 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (PICKUP & RAM-50)

Application Preferred Range
2WD
Camber (Front) (1) 2/3 1/8 To 1 1/8
Caster (1) 2 1/2 1 1/2 To 3 1/2
Toe-In (Front) (1) 3/8 1/4 To 1/2
Toe-In (Front) (2) 3/16 (5) 1/8 To 1/4 (3-6)
4WD
Camber (Front) (1) 1 1/2 To 1 1/2
Caster (1) 2 1 To 3
Toe-In (Front) (1) 3/8 1/4 To 1/2
Toe-In (Front) (2) 3/16 (5) 1/8 To 1/4 (3-6)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (PRECIS)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -11/16 -1 To -3/16
Caster (1)
With P/S 1 2/3 1 1/8 To 2 1/8
Without P/S 1 1/2 To 1 1/2
Toe-In (1)
Front 1/16 -1/8 To 1/4
Rear 0 N/A
Toe-In (2)
Front 1/32 (1) -1/16 To 1/8 (-2 To 3)
Rear 0 (0) N/A
Toe-Out On Turns (1)
Inner 35 7/8-38 5/8 N/A
Outer 31 1/2 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (STEALTH & 3000GT)

Application Preferred Range
2WD
Camber (1) 0 -1/2 To 1/2
Caster (1) 3 1/2 3 To 4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -3/16 To 3/16
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-Out On Turns (1)
Inner 33 3/4 N/A
Outer 28 11/32 N/A
AWD
Camber (1)
Front 0 -1/2 To 1/2
Rear -1/8 -5/8 To 3/8
Caster (1) 3 1/2 3 To 4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -3/16 To 3/16
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-Out On Turns (1)
Inner 33 3/4 N/A
Outer 28 11/32 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.