SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1990PREMIER ESREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS - BASIC TESTINGMECHANICAL INSPECTIONCOMPRESSION
1990 Eagle Premier ES

Mechanical Inspection: Compression

1990 Eagle Premier ESSECTION Compression

Engine mechanical condition can be checked using a compression gauge, vacuum gauge, or an engine analyzer capable of performing a relative compression test. See engine analyzer instruction manual for availability and description of relative compression feature.

CAUTION: Use a remote starter (NOT the ignition switch) to crank engine during compression test. The fuel injectors on many fuel injected models are triggered during the cranking mode. This could cause a fire hazard, flooding, crankcase contamination, hydrostatic lock, or lubrication to be washed off of cylinder walls.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.