Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Dodge and Ram ProMaster 3500 CutawayFACTORY OEM SERVICE PROCEDURE
Sensor, Right Blind Spot (RBSS)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| C1000-44 | ELECTRONIC CONTROL UNIT - DATA MEMORY FAILURE |
| C1000-45 | ELECTRONIC CONTROL UNIT - PROGRAM MEMORY FAILURE |
| C1000-46 | ELECTRONIC CONTROL UNIT - CALIBRATION/PARAMETER MEMORY FAILURE |
| C1000-47 | ELECTRONIC CONTROL UNIT - WATCHDOG/SAFETY MC FAILURE |
| C1003-04 | BLIND SPOT SENSOR PROBLEM - SYSTEM INTERNAL FAILURES |
| C1003-49 | BLIND SPOT SENSOR PROBLEM - INTERNAL ELECTRONIC FAILURE |
| C1003-78 | BLIND SPOT SENSOR PROBLEM - ALIGNMENT OR ADJUSTMENT INCORRECT |
| C1003-97 | BLIND SPOT SENSOR PROBLEM - COMPONENT OR SYSTEM OPERATION OBSTRUCTED OR BLOCKED |
| C1004-16 | BATTERY VOLTAGE INPUT CIRCUIT - CIRCUIT VOLTAGE BELOW THRESHOLD |
| C1004-17 | BATTERY VOLTAGE INPUT CIRCUIT - CIRCUIT VOLTAGE ABOVE THRESHOLD |
| C1005-02 | RBSS RADAR SENSOR ADDRESS FAULT - GENERAL SIGNAL FAILURE |
| C100A-11 | RIGHT BLIND SPOT SENSOR - CIRCUIT SHORT TO GROUND |
| C100A-15 | RIGHT BLIND SPOT SENSOR - CIRCUIT SHORT TO BATTERY OR OPEN |
| C2000-64 | STATUS_TTM.TRAILERCONNECTIONSTS - SIGNAL PLAUSIBILITY FAILURE |
| C2001-64 | IGN LINE AND STATUS_BCM.KEYSTS - SIGNAL PLAUSIBILITY FAILURE |
| C2002-64 | EXTERNAL_LIGHTS.TURNLIGHTACTIVATIONSTS - SIGNAL PLAUSIBILITY FAILURE |
| C2003-64 | VEHICLE_SPEED_ODOMETER.VEHICLESPEEDFAILSTS - SIGNAL PLAUSIBILITY FAILURE |
| C2004-64 | IPC_VEHICLE_SETUP.BSDENABLE - SIGNAL PLAUSIBILITY FAILURE |
| C2005-64 | RBSS_OPERATIONALMODESTS - SIGNAL PLAUSIBILITY FAILURE |
| C2006-64 | DYNAMIC_VEHICLE_INFO4.LWSFAILSTS - SIGNAL PLAUSIBILITY FAILURE |
| C2007-64 | DYNAMIC_VEHICLE_INFO2.YRSSTAT - SIGNAL PLAUSIBILITY FAILURE |
| C2010-64 | VIN MISMATCH - SIGNAL PLAUSIBILITY FAILURE |
| U0010-88 | B CAN - BUS OFF |
| U0100-87 | PRIVATE CAN - MISSING MESSAGE |
| U0100-88 | PRIVATE CAN - BUS OFF |
| U1700-86 | BODY COMPUTER MODULE (BCM) - SIGNAL INVALID |
| U1700-87 | BODY CONTROL MODULE (BCM) - MISSING MESSAGE |
| U1703-86 | INSTRUMENT PANEL CLUSTER (IPC) - SIGNAL INVALID |
| U1703-87 | INSTRUMENT PANEL CLUSTER (IPC) - MISSING MESSAGE |
| U1751-86 | LEFT BLIND SPOT SENSOR (LBSS) - SIGNAL INVALID |
| U1751-87 | LEFT BLIND SPOT SENSOR (LBSS) - MISSING MESSAGE |
| U1763-86 | TTM (TRAILER TOW MODULE)-SIGNAL INVALID |
| U1763-87 | TTM (TRAILER TOW MODULE)-MISSING MESSAGE |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.